How to convert raw CinemaDNG stills sequence to video with Pavtube
Raw CinemaDNG stills sequences contain the individual frames captured by a cinema camera, often recovered from BRAW footage. They are not simply a set of photographs: the order, frame rate and colour treatment determine how the final moving image will look. Converting them to video creates a manageable master for editing, review and delivery without changing the source files.
Pavtube offers a practical conversion and compression workflow on Windows and Mac. The sensible division of labour is to assemble and grade the raw frames with a suitable editing tool, then use Pavtube to encode the finished master and any lighter delivery copies. For busy freelance productions, that division also makes the handover from camera cards to archived projects much easier to document.
Plan the sequence and protect the originals
Start by recording the camera model, lens, clip name, capture frame rate and starting timecode. Count the DNG files against those notes: ten seconds at 24 fps should contain 240 frames, while the same duration at 25 fps should contain 250. An unexpected extra or missing frame can reveal a duplicated transfer before it becomes a visible stutter.
Copy the untouched capture to at least two drives, keeping one separate from the working computer. Rename only working copies, using simple numbered filenames and consistent folders. Test that the first, middle and final frames open cleanly. A read error at the last frame is often the first sign that a card was copied incompletely.
Give the archive enough capacity for the source frames, project files and rendered masters. Compare storage and processing quotes in Australian dollars and check whether local prices include GST. On a laptop, render to an external drive rather than filling the system disk, especially when a client deadline is approaching.
Check compatibility and frame rates
Check whether your installed Pavtube build accepts a numbered DNG image sequence, and test it with a short section before importing the full shoot. If that option is unavailable, assemble the frames in a sequence-aware editor such as DaVinci Resolve and export a lossless intermediate or high-quality ProRes master for Pavtube. Converting the raw frames to ordinary JPEGs first would sacrifice much of the data you chose to record.
Set the sequence rate to the camera's capture rate and keep it unchanged through grading, editing and export. Australian mains electricity runs at 50 Hz, which influences shutter choices under indoor lighting. A 25 fps project at a 1/50 shutter can handle many 50 Hz sources cleanly, while a 24 fps setup needs careful testing around fluorescent fittings and older office lights.
Record wall-clock time as well as camera timecode when a production crosses state borders. Sydney, Melbourne and Brisbane share the Eastern time zone, but daylight-saving rules differ across Australia; Perth remains on Western Standard Time, and Adelaide is 30 minutes behind Eastern Time. The camera's continuous timecode should not be rewritten when those clocks change.
Older camera files may sit alongside the raw sequence. Canon, Panasonic and Sony models commonly recorded AVCHD video in MTS containers, which is a separate workflow from CinemaDNG. DigiSNS's guide to watching MTS files explains that format before those clips are transcoded for the edit.
Assemble and colour-manage the footage
Import the ordered frames into a timeline, verify that the playhead moves at real speed and check for gaps at every cut. Apply the camera-appropriate raw transform once, then make creative grading adjustments in the same colour-managed timeline. Export a mezzanine master, such as ProRes 422 HQ or DNxHR HQX, rather than a heavily compressed review file that will be decoded and re-encoded again.
The Australian summer can punish inconsistent exposure decisions. In December and January, hard light around Bondi or Coober Pedy may clip highlights, while fast-moving cloud can change the look of a Melbourne street scene between takes. Compare frames from different points in the day before applying a shared grade, and avoid crushing the raw latitude into a fixed look too early.
Keep a small set of reference frames showing skin tones, bright surfaces and deep shadows. Compare them on a calibrated display where possible. A clean image on a dark laptop screen can conceal both a colour cast and excessive contrast that will become obvious on a television.
Convert the master in Pavtube
Open Pavtube on Windows or Mac, select the mezzanine master for conversion and choose a separate output folder. Give the file a name that identifies the clip, version and delivery purpose. Avoid spaces or unusual characters if it will pass through older editing systems, and keep the original master untouched beside the exported result.
For a broadly compatible deliverable, choose MP4 with H.264 video and AAC audio, keeping the original frame rate and using even dimensions such as 1920 by 1080 or 3840 by 2160. A quality-based variable bit rate setting usually gives a better balance than a low fixed bit rate. H.265 produces smaller files, but ProRes and DNxHR remain valuable as editing or archival masters rather than direct-to-client versions.
Start the export, let the process complete and review the finished file from beginning to end. Confirm the duration, first and last frames, playback speed and colour against the source. Give each purpose its own suffix, such as archive, web and social, so later changes to one version do not overwrite another.
Add sound and build the delivery version
Treat the soundtrack as a separate layer of the production, not as an automatic companion to the picture. Sync dialogue or production sound to picture using the recorded timecode or a visible clap, then remove clicks, noise and unwanted pauses in a proper editor. Pavtube's audio mixing and editing functions can support the final mix after the picture has been prepared.
Set sensible monitoring levels so dialogue remains clear without forcing the mix into distortion. For online stereo delivery, around -14 LUFS integrated loudness is a useful starting point, with true peaks no higher than -1 dBTP; a commissioned broadcast project may require another standard. Keep stems and the unprocessed production sound, because a mixed track cannot recreate separate dialogue and music balances later.
Check music rights before a commercial launch. Australian campaigns may need clearance through APRA AMCOS or another relevant rights holder, especially when the video will run in paid media or public spaces. Licensing a track for a social post does not automatically cover every territory or use. Record the licence details beside the project so another producer can verify them without guessing.
Test playback across common devices
For an Australian audience, test on the devices viewers will actually use, not only on the editing computer. Play the MP4 on recent Samsung, LG or Sony televisions, an iPhone, an iPad, an Apple TV and a Windows or Mac laptop. If the audience includes Android users or older hardware, add those devices too. Check both image and sound, including wireless playback where that is part of the viewing habit.
Some edit suites and homes still encounter PAL-era equipment or SD video from older productions. A 25 fps PAL project should not simply be relabelled as 29.97 fps; deliberate frame-rate conversion is needed to preserve motion and duration. An H.264 MP4 with AAC audio generally travels between these systems more reliably than a ProRes file or an HEVC export with limited device support.
Streaming platforms may compress the file again, so upload a clean master rather than a tiny, heavily compressed copy. Watch the platform's version after processing and compare dialogue clarity and fine detail with the local playback. This also reveals whether a lower-resolution delivery file is sufficient for mobile viewing.
Archive, share and reuse the project
Archive the camera originals, the ordered CinemaDNG frames, the editing project, grading information, final masters, music licences and a plain-text notes file. Include the frame rate, resolution, timecode starting point and audio-sync method. Keep at least two copies in separate locations, and verify an archived frame before relying on it months later when a client requests a small revision.
Give reviewers a lightweight version while retaining the high-quality master for final delivery. Include a short note describing the codec, resolution, audio format and intended use. The wider publishing process can be researched through qloudpress publishing resources, while the exported master remains the authoritative version for edits and re-encodes.
Plan for several aspect ratios without damaging the original composition. Produce a separate vertical crop rather than squeezing a widescreen frame, and check captions for safe areas. Use Australian English and unambiguous day-month-year labels when teams work across different states. Keeping the raw sequence and graded master intact makes each new delivery a controlled conversion rather than another destructive round of editing.